5 points about REOS
-
SIMPLE DESIGN
ease of use
-
LOW OPERATING COSTS
the cost of washing 1 m2 is > 0.01 EUR
-
HANDY
fits in a passenger car
-
ECOLOGICAL
washing does not require any chemicals
-
ACCELERATES WORK
What water fed washing is and what are differences between RO and DI systems
Demineralized water is completely pure water, devoid of all minerals.
The amount of substances in the water can be checked using the TDS meter (total dissolved solids – a sum of dissolved substances). The purity level is given in PPM (parts per minion – parts per million). If the PPM is 0, the water is completely demineralized. Fully purified water provides fantastic results when cleaning windows and facades – reduces electrostaticity, cleans perfectly without chemicals, leaves no streaks and stains after drying.
Thanks to Water Fed, we can quickly and thoroughly clean glazing, blinds, metal structures and composite facades up to a height of 24 meters.
The complete system for washing with demineralized water (Water Fed) consists of a water demineralization device, a pole usually made of carbon fiber and a brush with soft bristles. Everything is connected to each other by hoses. Two things are important to achieve the perfect cleaning result:
The first is demineralized water – water that does not contain any minerals and is perfectly pure.
The second issue is the thorough removal of all dirt from the washed surface and all nooks and crannies.
There are two types of filter systems:
DI (deionisation)
filtration takes place by flowing water through a tank filled with deionization resin. The resin wears out and is replaced with a new one. This solution works best in areas with a low PPM value and when the Water Fed technology is occasionally used.
RO (reverse osmosis)
– the main filtration is done through the reverse osmosis process. The membrane, which is the most important tool of this system, is preceded by prefilters that protect it against excessive wear and damage. The deionization tank or filter is located at the end of the system and polishes the water leaving the membrane from ~ 10 PPM to 0 PPM.
A new level of cleaning with demineralized water
Several months of design work, hundreds of tested solutions and thousands of ideas allowed for the creation of REOS ONE – a compact RO/DI water demineralization system.
The device has been designed with attention to the smallest details, thanks to which we received a product free of defects. The device does not require an electric power supply or a pump, it works with the use of running water pressure from the mains, which allows washing with a telescopic pole up to 20 meters height.
The REOS ONE system uses three-stage water filtration for maximum efficiency and reduced operating costs.
The first carbon sediment filter captures chlorine and sediment, including solid particles such as sand grains and pollen. Then the water goes to the reverse osmosis membrane – at this stage RE-OS purifies the water from 95% of minerals and impurities. In the reverse osmosis process, water is divided into two parts – waste, containing minerals and impurities, and clean water that goes to the last deionization filter. Thanks to the use of such a solution, we obtain 100% purified water that will not leave streaks and stains after evaporation.
YOU CAN IMPROVE YOUR SYSTEM EFFICIENCY BY USING A DEDICATED PUMP.
It allows you to perform orders in places where the water pressure is very low or the water source is more than 80 m away. The pump will also increase the yield of pure water, so that the system can be used by two people at the same time. In cooperation with the leading pump manufacturer Grundfos, we have developed a product that provides maximum performance in a relatively small size. Reos Grundfos is a powerful pump packed in a handy frame that will make it easy to move with the equipment.
Thanks to its simple construction and easy operation, the system is suitable for both professionals and people starting their adventure with Water Fed technology
Technical data
| Reos One System | Reos One System with Reos Grundfos 0,5kW pump | Reos One System with Reos Grundfos 0,9kW pump | |
|---|---|---|---|
| Number of operators simultaneously | 1 | 1 | 1-2 |
| Filtration | RO/DI | RO/DI | RO/DI |
| Dimensions | 130 x 56 x 50 cm | 130 x 56 x 50 cm / 45 x 22 x 35 cm | 130 x 56 x 50 cm / 45 x 22 x 35 cm |
| Weight | 25 kg | 25 kg / 16 kg | 25 kg / 19 kg |
| Frame material | aluminium | aluminium | aluminium |
| Range from the water source | To 80 m | To 180 m | To 180 m |
| Production of demineralized water | 60 – 120 l/h | 80 – 200 l/h | 120 – 250 l/h |
| Power supply | cap water pressure | cap water pressure / electricity | cap water pressure / electricity |
| Power | - | 0,5 kW | 0,9 kW |
| Minimum operating pressure | 4 bar | 3 bar | 3 bar |
| Maximum working pressure | 8 bar | 8 bar | 8 bar |
| Maximum water temperature | 30°C | 30°C | 30°C |
| Ambient temperature for work | 5°C – 30°C | 5°C – 30°C | 5°C – 30°C |
| DI operating mode | Yes | Yes | Yes |
Together with the system you get:
- Coupler to change the operating mode to DI.
- Two filter wrenches and a TDS HM Digital water hardness meter with a cover.
- You receive a hose for connection system and a pump.
- Warranty: 24 months from purchase, lifetime after-sales support.
- We provide an electronic manual and instructional videos for each system.
DI mode – possibility to work without RO filtration:
- It bypasses the first two stages of filtration, allowing you to work with very low water pressure.
- It replaces the additional DI system.
- To be used with a water source more than 80 meters from the system or with very low mains water pressure working without a pump.
Why is the pump not mounted on one frame with the system as with most manufacturers?
- This solution allows for an “easier start” – you can buy a system without a pump to start with, learn to wash, handle orders up to 80m from a water source, and then buy a pump when you feel it is a good time to do so.
- It’s easier to put the system into the car – you work alone many times, inserting a standard system weighing over 40 kg into a passenger car without scratching the bumper is a real challenge. With this solution, you will not experience this problem.
- You do not always have access to electricity on request. Sometimes you only have to use the wa-ter source – then the pump stays in the car.
- If at any time your order forces you to carry the system, our solution will allow you to do it yourself 🙂
Within an hour, one operator can wash between 50 to 100 m2 of surface.
The tables provide approximate consumption values of the resin / filters in the Reos One system and in the 11 liter deionization resin tank. Values may vary depending on the region where the water source is located. This is due to the variety of substances dissolved in the water and the water pressure in the source.
Before purchasing a system, establish the PPM of water in the region where you will be working
Water at the service point
| Reos One – reverse osmosis system | Tank for deionization resin 11 liters (7 liters of resin) | |
|---|---|---|
| The amount of pure water produced | 37 500 l. | 1750 l. |
| The amount of surface washed | 20 000 – 37 500 m2 | 1000 – 1750 m2 |
| Approximate cost of cleaning 1 m² of moderately dirty surface (without the cost of water itself) | below 0,01 EUR (excl. VAT) | 0,03 EUR (excl. VAT) |
| Approximate cost of use per month when working 4 days a week (day = 8 hours of work) | 8 EUR (excl. VAT) | 220 EUR (excl. VAT) |
| Filter / resin replacement cost | 27 EUR (excl. VAT) | 35 EUR (excl. VAT) |
| System price | 1900 EUR (excl. VAT) | 159 EUR (excl. VAT) |
| Reos One – reverse osmosis system | Tank for deionization resin 11 liters (7 liters of resin) | |
|---|---|---|
| The amount of pure water produced | 15 000 l. | 700 l. |
| The amount of surface washed | 8 000 – 15 000 m2 | 400 – 700 m2 |
| Approximate cost of cleaning 1 m² of moderately dirty surface (without the cost of water itself) | 0,01 EUR (excl. VAT) | 0,08 EUR (excl. VAT) |
| Approximate cost of use per month when working 4 days a week (day = 8 hours of work) | 20 EUR (excl. VAT) | 550 EUR (excl. VAT) |
| Filter / resin replacement cost | 27 EUR (excl. VAT) | 35 EUR (excl. VAT) |
| System price | 1900 EUR (excl. VAT) | 159 EUR (excl. VAT) |
| Reos One – reverse osmosis system | Tank for deionization resin 11 liters (7 liters of resin) | |
|---|---|---|
| The amount of pure water produced | 9500 l. | 450 l. |
| The amount of surface washed | 5000 – 9500 m2 | 250 – 450 m2 |
| Approximate cost of cleaning 1 m² of moderately dirty surface (without the cost of water itself) | up 0,02 EUR (excl. VAT) | 0,14 EUR (excl. VAT) |
| Approximate cost of use per month when working 4 days a week (day = 8 hours of work) | 32 EUR (excl. VAT) | 880 EUR (excl. VAT) |
| Filter / resin replacement cost | 27 EUR (excl. VAT) | 35 EUR (excl. VAT) |
| System price | 1900 EUR (excl. VAT) | 159 EUR (excl. VAT) |
Why to choose REOS ONE?
- Compact size and low weight – you can easily handle orders even with a small car.
- Careful workmanship and simple construction – there is nothing to break here.
- Comfortable handles in several places and inflatable pneumatic wheels will facilitate your transport.
- Filters and membrane are in the most popular sizes – we did not try to force the rarest and expensive sizes to keep operating costs as low as possible.
- You can buy spare parts from us – if you unfortunately damage the system, we provide advice and service as well as parts at good prices.
- Price – it is extremely favorable so that you can easily start or develop your business minimizing costs.